Please wait a moment ...
Please wait a moment ...
Presentation of results from field test “Efficiency Run 2015”: Long-haulage trucks: integrated approach reduces CO2 emissions by up to 14 percent
- Large-scale field test with participation of Daimler Trucks, DB Schenker Logistics, Grosse-Vehne and Elflein transport companies
- Comprehensively optimised truck reduces diesel consumption and CO2 emissions by up to 14 percent
- Long Combination Vehicle also impressive, confirms its potential in the field test: CO2 emissions reduced by 17 percent
- Measurements and certification of the results by independent testing organisation DEKRA
- Daimler Board Member Dr Wolfgang Bernhard: “We have proven: if we want to significantly further reduce both fuel consumption and CO2 emissions in road transport, we need to look beyond just the engine. We must widen our focus to include tyres, semitrailer and other key components.”
Stuttgart / Berlin – Using technologies available on the market, the fuel consumption, and therefore the CO2 emissions, of modern truck combinations can be reduced by a double-digit percentage. This was the finding of a field test, the results of which were presented today in Berlin by Daimler Trucks together with the project participants. These results from field test with the name Efficiency Run will be of great significance in the future for achieving CO2 targets for road freight transport. This is because the Efficiency Run has demonstrated that fuel consumption, and therefore also CO2 emissions, can be significantly reduced – also at lower cost – if optimisation efforts focus not just on the engine of the tractor unit, but on the vehicle as a whole. Additional significant CO2 reductions, which could add up from factors like specific fuels, fleet operations or driver trainings, have not yet been considered in this field test.
The series of tests was conducted by Daimler Trucks in cooperation with the leading German logistics companies DB Schenker Logistics, Grosse-Vehne and Elflein. This involved genuine freight being driven on genuine routes under realistic conditions. The tests were supervised in detail by the DEKRA testing organisation, which laid down the test conditions, carried out the measurements and evaluated the results.
One of the key results: The two Mercedes-Benz Actros standard semi-trailer combinations that were optimised for the Efficiency Run each consumed around 12 to 14 percent less fuel than standard semi-trailer combinations of the respective transport companies based on their fleets in 2014.
The Efficiency Run also investigated the potential of the Long Combination Vehicle – once again with a clear result. In the test, the standard Long Combination Vehicle showed a reduction in consumption of around 17 percent compared with the standard semi-trailer combination used in volume-based transport.
Expectations clearly exceeded
“We have proven: if we want to significantly further reduce both fuel consumption and CO2 emissions, we need to look beyond just the engine. We must widen our focus to include tyres, semitrailer and other key components. This is the only way in which we can achieve our objective in an affordable manner,” stated Dr. Wolfgang Bernhard, member of the Board of Management of Daimler AG responsible for Daimler Trucks & Buses.
“Our test also confirms the formula that two Long Combination Vehicles have the same transport capacity as three conventional semi-trailer combinations – with significantly higher efficiency and lower impact on the environment,” said Dr Bernhard.
Stefan Buchner, Head of Mercedes-Benz Trucks: “Our aim is to ensure that customers who buy a Mercedes-Benz Actros have the most efficient vehicle in its class. So, naturally, we were especially keen to see how much more optimisation is possible on the vehicle as a whole. Reductions of up to 14 percent on the standard semi-trailer combination clearly exceeded our expectations.”
CO2 reduction as a task for the entire industry
European commercial-vehicle manufacturers have already achieved a great deal on the CO2 front: for example, fuel consumption per tonne-kilometre has been reduced by around 60 percent since 1965 and, over the same period, six exhaust emissions standards have been put into practice. This demonstrates that the most effective regulator for a commercial-vehicle manufacturer is the customer. With fuel costs making up almost one-third of the total cost of ownership (TCO), customers are constantly calling for fuel consumption to be minimised. In consequence, Daimler Trucks has always made every effort to supply customers with vehicles that are as efficient as possible.
All commercial-vehicle manufacturers are currently confronted with new CO2 targets for road freight transport. Thus, the EU intends to achieve a CO2 reduction of 30 percent by 2030 (compared with 2005). For Germany, a reduction of even -40 percent is under discussion. Against this backdrop, it is necessary to adopt new approaches, because it is no longer enough to focus exclusively on the tractor unit. To be able in future to achieve even more significant – yet affordable – reductions in CO2 emissions, politicians and the transport industry must join forces and adopt an integrated approach.
“Integrated approach” must take account of all factors
The goal, therefore, is to adopt a so-called integrated approach in which all the actors involved in road freight transport take part in achieving the targets: commercial-vehicle manufacturers, body/tyre suppliers, logistics companies and, last but not least, politicians. Daimler Trucks presented this concept together with other European manufacturers at the 2014 IAA for Commercial Vehicles.
The objective of the integrated approach is to optimise the entire truck/transport system. In addition to the tractor unit, consideration is given also to the semitrailer (e.g. weights and dimensions, air resistance, lightweight design), tyres (e.g. rolling resistance, air pressure, single tyres) and fuel (e.g. biofuel, natural gas). Yet the
integrated approach also attaches importance to vehicle operation (e.g. driver training, cargo pooling), infrastructure and the issue of fleet renewal. The Efficiency Run has now demonstrated that the integrated approach works in real-world practice.
Efficiency Run shows how to further reduce CO2 in an economic way
For the Efficiency Run, Daimler Trucks and the three logistics companies focused on the vehicle-specific optimisation potential. The requirements for the Efficiency Run can be reduced to a simple formula: as close to the real world as possible. This means that the test should use standard tractor units with standard powertrains. The vehicles in the configuration Actros 1842 with 3700 mm wheelbase were optimised exclusively using components that are currently available on the market. Sporting distinctive red/white colours, the two Actros Efficiency Run semi-trailer combinations from the fleets of DB Schenker and Grosse-Vehne that took part in the field test were equipped with Predictive Powertrain Control (PPC).
The Actros tractor units were hooked up to weight-optimised Krone Eco semitrailers, which are likewise available on the market in this form. Optimisation of the vehicles was rounded off with low rolling-resistance tyres. The Long Combination Vehicle with a two-axle Actros 1845 tractor unit and four-axle semitrailer was identical to the standard combinations used by the third participating transport company, Elflein. The reference vehicles for the one-week tests were standard semi-trailer combinations of the three transport companies with similar mileages to those of the Efficiency Run vehicles.
Supervision of the test runs by DEKRA
During the field test, the drivers of the trucks were accompanied by DEKRA test engineers, who manually recorded every event, such as traffic jams, traffic light stops, manoeuvres, empty trips and “slipstreaming”, in order to assess the relevance of external influences. Special care was taken to accurately measure the fuel consumption. During the tests, the trucks were refuelled by a calibrated tanker vehicle to guarantee an identical fuel quality and temperature. The DEKRA experts filled up the vehicles first with the pump nozzle and then using a measuring glass.
Uwe Burckhardt, Deputy Head of the DEKRA Automobile Test Centre: “We wanted the comparison between the reference vehicles from the fleets of the participating companies and the consumption-optimised vehicles to take place under realistic conditions, be reproducible and deliver meaningful results of high quality. We went to considerable lengths to achieve this.”
A comprehensive evaluation of the collected data by DEKRA delivered a clear result: fuel consumption can already today be optimised at acceptable cost using components available on the market. It is now up to each of the participants to ensure that the tested solutions are actually put into widespread practice on the roads.